22 mei 2006

Voer Skype gesprekken via het SIP VoIP protocol

Op het Michigan Telephone, VoIP and Broadband blog vond ik een interessant artikel over Uplink Skype2Sip. Met deze software kun je een op het Sip protocol gebaseerde VoIP centrales geschikt maken voor Skype gebruik.

Uplink Skype2Sip Skype SIP VoIP screenshot

Een groeiend aantal bedrijven over op het SIP protocol gebaseerde VoIP centrales. Met Skype2Sip kunnen deze centrales geschikt worden gemaakt voor Skype gebruik. Hiermee wordt een belangrijk bezwaar van Skype, het gesloten protocol, omzeild.

Met een paar eenvoudige stappen is het mogelijk om een SIP gesprek te starten via Skype:
1. Follow the instructions for your virtual PBX to add an external line for Uplink.
2. Configure your PBX to route outgoing calls prefixed with a number of your choice to the external Uplink line.
3. Start Uplink and open the options dialog.
4. Under the SIP tab, supply the details of the external line you have created for using Uplink.
5. Under the General tab, ensure that the user name of the external line is entered into the field labelled When SIP calls Skype.
6. Click OK and restart Uplink to ensure the settings are applied.
7. When you restart Uplink, the log window should indicate that it has registered with your PBX.
8. Make sure Skype is running and you are signed in to the Skype network.
9. Using whatever hardware or software you normally use to make SIP calls, enter the prefix digit you specified when configuring your PBX in step 2, followed by the number you wish to dial (it can be a skype user name or a Skype Out number if your Skype setup supports Skype Out.
10. The Uplink window should indicate that the call is being routed and Skype should commence making the call.

Je kunt ook Skype gesprekken via je SIP server ontvangen:
In order to receive a call from Skype you need to tell Uplink what number it should call when Skype notifies it of an incoming call.

* Open the Options page and click on the General tab. In the box When Skype calls SIP, dial the following number: enter the user name or number of your SIP line. If you are using a virtual PBX such as Axon you should enter the name or number of the external line you configured for Uplink.
* Now make a call to your Skype user (or a call to your Skype-in number if you have one). You should receive notification of the call on your SIP line and be able to answer the call with whatever hardware you normally use to receive calls on that line.

Ik denk dat ook Asterisk centrales geschikt kunnen worden gemaakt voor Skype met Skype2Sip, maar ik heb hier zelf geen ervaring mee.

1 opmerking:

  1. Anoniem1:21 a.m.

    niet gebruiken,
    maakt windows vista kapot :( ik kreeg blueschreen.

    BeantwoordenVerwijderen